ERNIE BALL "VP Jr. 25 K (SOLD)

The potentiometer has a 25k ohm resistance suitable for an active audio path. Overall Volume Pedal Junior dimensions: 3.5" W x 10" L x2 3/8" H . The main pivot shaft is of centerless ground 1/2' diameter stainless steel, precision seated though nylon bushings at both ends. Tough long lasting Kevlar cable transmits pedal travel to the controls and is attached by stainless steel springs.

ERNIE BALL "MVP Most Valuable Pedal Volumel" (SOLD)

Minimum volume control allows for the heel position to be set at zero up to 50% for any rhythm level. Gain control allows for the toe position to be set at 100% up to a boosted 20+ decibels of gain for powerful lead levels. Tuner output can be used at any volume, with any tuner, without any effect on audio signal. No high frequency loss at any volume. Works with active and passive audio signals. Can be placed anywhere in the signal chain. Improved sweep for ideal volume control, 9v batttery or AC adapter powered. (adapter not included)

ERNIE BALL "250 K Volume Pedal" (SOLD)

250K MONO VOLUME PEDAL
FOR USE WITH PASSIVE
ELECTRONICS

The potentiometer has a 250k ohm resistance suitable for the audio path of passive instruments. Behind the jack area under the footplate is a taper switch, which provides the user two distinct volume swell rates. Overall Volume Pedal dimensions: 4" W x 11" L x 2 3/4" H. The main pivot shaft is of centerless ground 1/2' diameter stainless steel, precision seated though nylon bushings at both ends. The large center shaft diameter, in addition the strength factor, creates a broader stress bearing surface.